Page 1
Quick Commissioning Guide This document is intended to assist installers in commissioning an SH5K+ Hybrid inverter and an SB4K8 Sungrow/Samsung battery (as an example). While every attempt has been made to simplify the commissioning, some fields may vary due to network compliance regulations and specifics of the installation.
Page 2
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476) service@sungrowpower.com.au www.sungrowpower.com.au When system is AC coupled and existing PV system us used to charge battery, the following must be enabled in the settings menu. Main Menu Enter Run Info...
Page 3
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476) service@sungrowpower.com.au www.sungrowpower.com.au Once the commissioning is completed, please follow the below procedures to test the system. (Note: below photos only show as an example) The inverter only shows green light ON and status shows Running; if the existing solar power is sufficient, the system should charge the battery.
Need help?
Do you have a question about the SH5K+ and is the answer not in the manual?
Questions and answers