Jigs List - PIONEER DJ XDJ-XZ Service Manual

1

3.2 JIGS LIST

Jigs List
A
Jig Name
Software for writing the serial
number
License-key card for Service
License-key card for Service
Extension jig FFC (27 pin, L = 500 mm)
Acetate cloth tape
B
Double side tape
Lubricants and Glues List
Name
C
Lubricating oil
Lubricating oil
D
E
F
8
1
2
Part No.
GGS1784 For writing the serial number of the unit to the MAIN Assy
after replacement. The file is uploaded to Niis.
Refer to "8.5 WRITING THE SERIAL NUMBER OF THE UNIT."
GGP1522 For activation of rekordbox dj
GGP1524 For activation of rekordbox Video
GGD1903 Used for "8.3 JOG DIAL ROTATION LOAD ADJUSTMENT MODE".
Refer to "7. DISASSEMBLY".
GYH1035 Refer to "9.8 LCD SECTION".
GYH1038 NITTO No. 500 (width:10 mm)
Refer to "7. DISASSEMBLY".
(JOG dial Section_Notes for Reassembling TFT LCD)
Part No.
GYA1001 Used for "9.4 CONTROL PANEL SECTION (1/3)",
"9.5 CONTROL PANEL SECTION (2/3)" and
"9.7 JOG DIALSECTION".
Refer to "7. DISASSEMBLY".
GEM1106 Used for "9.7 JOG DIAL SECTION".
Refer to "7. DISASSEMBLY".
(Dry surf HFD-1610)
XDJ-XZ
2
3
Purpose of use / Remarks
Remarks
3
4
4