PIONEER DJ XDJ-XZ Service Manual page 70

1
A 6
Remove the Sheet.
Caution:
Cannot be reused.
B
7
Remove the TFT LCD.
C
When it removes the TFT LCD, insert a pin
+
about 1.5 mm in diameter from the four holes
on the back side, push out and remove it.
D
Notes for Reassembling TFT LCD
Handling
area
E
F
70
1
2
Do not Do not
Handling
touch and push touch and push
If the double side tape that is used to fix If the double side tape that is used to fix
TFT LCD is damaged, remove it clearly. TFT LCD is damaged, remove it clearly.
And, stick the new double side tape And, stick the new double side tape
((NITTO No. 500) 10 mm × 53 mm) at the ((NITTO No. 500) 10 mm × 53 mm) at the
position shown in the figure. position shown in the figure.
2
3
Matching
position
• Bottom view
area
XDJ-XZ
3
4
Sheet
Matching
position
6
7
2
Align it in numerical order. Align it in numerical order.
1
Align it in numerical order. Align it in numerical order.
4
TFT LCD