PIONEER DJ XDJ-XZ Service Manual page 77

5
switch
RELOOP/EXIT button
JOG ADJUST knob
SHIFT button
Load adjustment method
Remove the screw fixing the Adjust plate, then screw it into the hole corresponding to the value (-1, -2, -3, -4, +1, +2 or +3)
for a load to be added:
-1, -2, -3, -4 : To decrease the load
+1, +2, +3 : To increase the load
Reset
Press SHIFT button and Rotary selector : all data is reset only on the DECK side where SHIFT button is pressed.
Measurement history
The measurement data (2, 3, and 4 above) from each measurement session will be stored in memory for up to 99 sessions.
To display measurement data, turn the Rotary selector while holding the SHIFT button of each DECK pressed.
5
6
Rotary selector
x. y
To decrease To decrease
the load the load
XDJ-XZ
6
7
x. y
To increase the load To increase the load
7
8
RELOOP/EXIT button
MEMORY button
JOG ADJUST knob
TEMPO button
SHIFT button
Adjust plate
77
8
A
B
C
D
E
F