Writing The Serial Number Of The Unit - PIONEER DJ XDJ-XZ Service Manual

5

8.5 WRITING THE SERIAL NUMBER OF THE UNIT

Writing the serial number can be performed from a PC that is connected with this unit via a USB B cable.
Preparations
1 Download the software for writing the serial number from Niis.
2 The compressed files decompress and save to PC.
The generated folder is below.
! Ini folder
! Log folder
! XDJZX_SNW.exe
! hidcom.dll
Procedure
1 Turn on PC, and click "XDJZX_SNW.exe" in the generated
folder. When the software is started, untick "Label print".
2 Connect the unit with a PC via a USB B cable.
3 While holding the DECK 1 MEMORY and DECK 1 TEMPO
buttons pressed, press the
(Start up the unit in Test mode.)
4 Push [Serial Number Write] button, display serial input dialog
(first time).
Enter serial number by handwork or barcode reader, and push
"Enter".
If enter by handwork, enter " ' " before serial number.
(If forgot, displayed error)
If enter by barcode reader, need to connect for PC in advance.
*Reference screen
5
6
switch to turn the unit on.
6
7
5 Again display serial input dialog (second time), enter serial
number by handwork or barcode reader, and push "Enter"
like Step 4.
6 Dialog is displayed for the input of Destination Code, you need
to enter in accordance with following table.
Model Name Input Destination Code
XDJ-ZX/LWSYXJ
XDJ-ZX/UXJCB
XDJ-ZX/AXJ
7 If update is finished correctly, display "OK" after a while.
This is completed about to write serial number for system.
You need to confirm by Test mode about to write correctly.
The unit is already starting in Test mode [Mode 1 VERSION
INFORMATION]. Confirm that "LANGUAGE" is "ENGLISH
(AXJ model: CHINESE)" and "SERIAL" is the same as the serial
number of the unit.
XDJ-XZ
7
8
LANGUAGE
XDJ-ZX/L ENGLISH
XDJ-ZX/U ENGLISH
XDJ-ZX/A CHINESE
8
A
B
C
D
E
F
79