PIONEER DJ XDJ-XZ Service Manual page 58

1
A [2-2] LCDB Assy
1
Disconnect the 1 flexible cable, 2 FPC and
1 connector.
(CN3601 to 3604)
2
Remove the 14 screws and then remove the
LCDB Assy.
(BPZ26P080FTC)
Caution:
The locking function of the connectors of
CN3601, 3603 is fragile.
Therefore, when locking or unlocking, it is
necessary to work so that the force equally
B
applies to both sides with both hands.
Also, we need to be careful not to overpower.
[2-3] TFT LCD and Touch panel
1
Remove the 4 screws and then remobve the
Stay.
(BPZ26P080FTC)
2
Remove the TFT LCD.
3
Remove the Touch panel.
C
D
Jumper wires styling
E
FFC pass the slit of the barrier. FFC pass the slit of the barrier.
Bend the FFC 90 degrees Bend the FFC 90 degrees
in the backside (bottom). in the backside (bottom).
F
58
1
2
XDJ-XZ
2
3
1
1
CN3604 CN3604
CN3603 CN3603
1
CN3602 CN3602
CN3601 CN3601
1
• Bottom view
×4 ×4
1
3
Touch panel
• Bottom view
FFC pass the slit of the barrier. FFC pass the slit of the barrier.
3
4
×14 ×14
2
LCDB Assy
Stay
2
TFT LCD
4