Case 2050M Operator's Manual page 50

Cab door
WARNING
Fall hazard!
Always lock the cab doors in the full open or
full closed position before using the handrails
on the doors.
Failure to comply could result in death or se-
rious injury.
Door handle and door lock - Use the key to lock or unlock
door from outside the machine. Use the door handle to
open the door from the outside.
Open the door completely until it latches in place against
the cab to lock the door in the open position. To close the
door, use the door release knob.
NOTE: The key provided with the machine can be used
to lock and unlock the various panels and to activate the
engine starter switch functions.
Inside door latches
To secure the door in the open position from inside the
cab, push the door back until the door locks on the door
catch at the rear of the cab.
Push the latch to open the door from the inside.
3 - CONTROLS AND INSTRUMENTS
W0133A
3-2
4
RAIL12DOZ0659AA
5
RAIL13DOZ1596AA
6
RAPH12DOZ0087AA