11. Fill the engine with the proper amount of oil through
the fill port (4).
12. Start the engine and run at idle speed. Check the
engine oil filter and remote drain for leaks.
13. After two minutes stop the engine.
14. Wait for the engine oil to drain down for an accurate
reading on the dipstick (1).
15. Check the dipstick (1), and add additional oil, if nec-
essary.
16. Check for leaks around the filter and drain.
17. Secure the lower engine access plate.
NOTE: The oil flow rate can be improved if the oil is slightly warm and the oil fill cap or dipstick is removed from the
engine while draining.
7 - MAINTENANCE
7-47
6
RAIL13DOZ1693AA
7
RAIL13DOZ1694AA