Case 2050M Operator's Manual page 27

If the operator presence system is inoperable, then it must be repaired.
Seat belts
Seat belts must be worn at all times.
Seat belt inspection and maintenance:
• Keep seat belts in good condition.
• Keep sharp edges and items than can cause damage away from the belts.
• Periodically check belts, buckles, retractors, tethers, slack take-up system, and mounting bolts for damage and
wear.
• Replace all parts that have damage or wear.
• Replace belts that have cuts that can make the belt weak.
• Check that bolts are tight on the seat bracket or mounting.
• If the belt is attached to the seat, make sure that the seat or seat brackets are mounted securely.
• Keep seat belts clean and dry.
• Clean belts only with soap solution and warm water.
• Do not use bleach or dye on the belts because this can make the belts weak.
Pull the right-hand belt from the seat belt retractor. Fasten
the metal belt end into the left-hand buckle.
Press the red button on the left-hand seat belt mechanism
to release the seat belt.
2 - SAFETY INFORMATION
2-5
1
RCIL10CWL037AAL
2
RCIL10CWL083FAL