Case 2050M Operator's Manual page 246

Seat belt
WARNING
Equipment failure could cause accident or injury!
Always fasten the seat belt securely before you operate the machine. Inspect seat belt parts for wear
and damage. Replace any and all worn or damaged parts of the seat belt prior to operation.
Failure to comply could result in death or serious injury.
Before you operate this machine, always make sure the
ROPS and operator's seat belt (1) is correctly installed.
The seat belt is an important part of the ROPS. You
must wear the seat belt at all times when you operate
the machine.
1. Make sure all that seat belt hardware is secure and
torqued.
2. Visually inspect the seat belt. If the seat belt is torn,
frayed, or the mechanism is damaged, replace the seat
belt.
3. Keep the seat belts clean. Wash the seat belts only in
soap and water. Do not use bleach or dye on the seat
belts. This will weaken the seat belt composition.
4. Torque seat belt hardware and seat mounting hardware
to:
73 - 87 N·m (53.8 - 64.2 lb ft).
Seat and mounting hardware
Make sure that all hardware that secures the seat (2) to
the cab is properly torqued (two each side). The seat
can be cleaned with a suitable upholstery cleaner.
Torque to: 54 N·m (39.8 lb ft).
7 - MAINTENANCE
7-90
W0046C
2
RAPH12DOZ0389AA
3
RAPH12DOZ0388AA