Case 2050M Operator's Manual page 207

Removing air from the fuel system
1. Remove air from the fuel system after changing the fuel
filter. Removing air from the fuel system may also be
necessary if the machine runs out of fuel, if the fuel
system has been serviced, or if the machine has been
in storage.
2. Make certain that the fuel tank shutoff is in the ON po-
sition.
3. Loosen the air bleed screw one or two turns.
4. Operate the hand primer until no air bubbles flow from
around the air bleed screw.
5. Tighten the air bleed screw.
6. Start the engine and check for leaks.
7 - MAINTENANCE
7-51
3
RAPH12DOZ0056AA