Case 2050M Operator's Manual page 202

5. Remove the engine oil drain plug (2).
6. Locate the oil filter (3) in the right front engine compart-
ment. Clean the area around the filter of dirt and debris.
Replace oil filter
7. Turn the oil filter (3) housing counterclockwise to re-
move. Remove and discard the filter following local en-
vironmental and waste regulations.
8. Apply a thin layer of clean oil to the new filter gasket.
9. Turn the new oil filter onto the base until the gasket
makes contact with the base, and then turn by hand an
additional 3/4 turn. Never use a filter wrench to install
a new filter.
10. Close the oil drain.
7 - MAINTENANCE
7-46
3
RAPH12DOZ0096AA
4
RAIL12DOZ0192AA
5
RAIL12DOZ0192AA