Case 2050M Operator's Manual page 247

ROPS cab torque specifications
WARNING
Tip-over hazard!
Adding additional weight (buckets, attachments, etc.) to the machine can create a tipping hazard. Do
not exceed the gross weight indicated by the machine specifications.
Failure to comply could result in death or serious injury.
1. Check the torque of the ROPS mounting bolts. If nec-
essary, tighten the bolts to the correct torque.
2. Check for cracks, rust, or holes in the ROPS and ROPS
components. Age, weather, and accidents can cause
damage to the ROPS and ROPS parts. If you have any
doubt about the integrity of the ROPS system, see your
authorized dealer.
ROPS cab mounting bolts (both sides)
NOTE: Torque specifications are for clean, dry threads.
7 - MAINTENANCE
Torque specifications
Torque to: 773 - 854 N·m (570.1 - 629.9 lb ft)
7-91
W0153A
4
RAIL12DOZ0175AA