Case 2050M Operator's Manual page 113

2. Place the machine direction control in neutral.
3. Turn the ignition switch to ON, and monitor the display
and gauges. If the engine preheat lamp is illuminated,
wait for the preheat process to complete before start-
ing the engine.
4. Press the deceleration or transmission pedal all the
way down.
5. Press the momentary toggle switch to disengage the
parking brake. The indicator light on the switch and
on the instrument cluster will go out when the parking
brake is disengaged.
6. Shift down to a low speed. Select an appropriate
speed from a speed range of 1–15. The monitor dis-
play will reflect the speed selected.
NOTE: The speed will default to the factory preset
speed (8) at initial key on.
7. Raise the blade above the ground, and make sure that
the ripper, if equipped, is in the transport position.
4 - OPERATING INSTRUCTIONS
4-11
2
RAPH12DOZ0080AA
3
RAPH12DOZ0149AA
4
RAPH12DOZ0133AA