Label Specifications - Intermec EasyCoder PL4 User Manual

Memory/Communications Specifications (continued)
Optional wireless
communications

Label Specifications

Label/tag width
Maximum
label/tag length
Inter-label gap
Label thickness
Tag thickness
Label roll size:
maximum
diameter
Inner core
diameter
Media
requirements
EasyCoder PL4 Printer User's Guide
Bluetooth compatible 2.4 GHz link
Wireless LAN capabilities comply with 802.11b
protocols
50.8 mm to 104.1 mm (2 inches to 4.1 inches)
508 mm (20 inches) with standard memory
2 mm to 4 mm (3 mm preferred)
0.08 inch to 0.16 inch (0.12 inch preferred)
0.064 mm to 0.165 mm (0.0025 inch to 0.0065
inch)
0.152 mm (0.0060 inch) maximum
66.7 mm (2.625 inch) O.D.
19 mm (0.75 inch) minimum; 35.05 mm (1.38 inch)
minimum diameter for linerless media
Use Intermec-brand direct thermal media that is
outside wound. Media may be reflective (black mark)
sensing or transmissive (gap) sensing, die-cut,
continuous, fanfold, or linerless.
For die-cut labels, use only full auto dies.
The reflective media black marks should extend past
the centerline of the roll.
Minimum Black Mark Dimensions:
Mark width: 12.7mm (0.5 inch) perpendicular to
edge of media, centered within the width of the roll.
Mark length: 2.4 mm (0.094 inch) parallel to edge of
media.
59