Installing M5200A Module Firmware Updates - Keysight M5200A Startup Manual

3 Setting up the M5200x software

3.4.2: Installing M5200A module firmware updates

58
Prerequisite
The Keysight M5200x software must be installed to update your module
firmware.
Downloading the Firmware
The latest firmware for the M5200A module is included in the Keysight
M5200x software package.
Modifying the Firmware
To update the FPGA firmware, you may follow the steps defined in the
previous section.
Based on your programming requirements, you may either upgrade or
downgrade the Firmware version on an M5200A module, using the SW
driver APIs or the M5200x SFP. The APIs to perform firmware update are
defined in the Online Help of the respective programming language you
may be using. The steps to perform firmware update using the SFP are
given below.
1 Launch the Keysight M5200x SFP software from the Start menu.
2 From the main menu of the M5200x software, click Utilities >
Firmware Update....
Figure 27
Currently, the firmware version on the M5200A modules is up-to-date.
NOTE
The next firmware version will be available in the next release of the
M5200x software.
Accessing Firmware Update option in SFP
M5200A PXIe Digitizer Modules Startup Guide