Keysight M5200A Startup Manual page 19

Cable type
System Sync/Link
MCX(m) to MCX(m)
SMA(m)-SMP(f)
Cat-5
M5200A PXIe Digitizer Modules Startup Guide
To connect the HP Z8 G4 workstation as an external controller to the
M9046A PXIe chassis, you require the following additional products:
To connect the HP Z8 G4 workstation as an external controller to the
M9046A PXIe chassis, you require the following additional products:
• M9049A PCIe High Performance Host Adapter
• M9023A PXIe High Performance System Module
• Y1201A PCIe cable
The M5000-series modules require specific Keysight cables that have been
customized for connectivity with the M9032x SSM modules and M9046A
PXIe high-performance chassis.
procure for the configuration of a single/multi-chassis multi-system setup.
Table 4
Specification
x4-x4, 0.5M
x4-x4, 1.0M
x8-2, x4, 0.5M
x8-2, x4, 1.0M
x8-x8, 0.5M
x8-x8, 1.0M
x8-x8, 2.0M
phase stable, 0.3m
phase stable, 1.0m
phase stable, 2.0m
0.3m
RJ-45 connectors (to interconnect chassis)
Overview on M5200A PXIe Digitizer Modules
Customized cables for use with M5200A PXIe Digitizer modules
Table 4 lists the cables that you may
Model number
Y1320A
Y1321A
Y1323A
Y1324A
Y1326A
Y1327A
Y1329A
Y1330A
Y1331A
Y1332A
Y1333A
1
19