Verifying Shipment Of M5200A Module; Inspecting For Damage - Keysight M5200A Startup Manual

WARNING

2.1.2: Verifying shipment of M5200A module

2.1.3: Inspecting for damage

CAUTION
M5200A PXIe Digitizer Modules Startup Guide
Both types, when used together, provide a significant level of ESD
protection. Of the two, only the table-mat and wrist-strap combination
provides adequate ESD protection when used alone. To ensure user safety,
the static-safe accessories must provide at least 1 MΩ of isolation from
ground.
DO NOT use these techniques for a static-safe workstation when
working on circuitry with a voltage potential greater than 500 volts.
Table 7 lists the items included in your M5200A module shipment:
Table 7 Verifying M5200A module shipment items
Qty. Keysight Part number
1 M5200A
1 M5200-92000
1 5972-3335
1 9320-6715
1 9320-6797
After unpacking an instrument, inspect it for any shipping damage. Report
any damage to the shipping agent immediately, as such damage is not
covered by the warranty (Refer to the warranty information at beginning of
this document).
To avoid damage when handling the M5200A module, do not touch
exposed connector pins.
Visit www.keysight.com/find/tips
your Keysight equipment.
Setting up the M5200A module
Description
Keysight M5200A PXIe Digitizer Module
Keysight M5200A PXIe Digitizer Module Quick Start Guide
PXI Modular Product Startup Quick Reference
China RoHS Addendum for Modules
Keysight safety leaflet
for information on preventing damage to
2
31