Table of Contents
Advertisement
OCPP 1.6
B
Before starting
Check following steps in order to ensure the correct function of OCPP 1.6:
Go to the Setup Webpage > 'Network' tab
Public Address Manager establishes where the Charge Point must obtain
the public IP address in order to send it later to the backend. Different
values can be selected in the 'Address Type' section:
Choose the option selected under 'Address Type' according to your
network topology. When done, please do not forget to save changes using
'Save' button in the upper right bar:
71
Advertisement
Table of Contents
Need help?
Do you have a question about the Master-Slave and is the answer not in the manual?
Questions and answers