Circontrol Master-Slave Instruction Manual page 68

Master/Slave Instruction Manual
Value
Use OCPP time
synchronization
Compress OCPP
messages
Energy for Start/Stop
transaction
Energy for MeterValues
Stop charge if StartTrans-
action rejects the user
66
Yes: Synchronization of date and time -> Enabled.
No: Synchronization of date and time -> Disabled.
NOTE: Date and Time is sent from backend on each
heartbeat response.
Yes: Compress messages between Charge point and
backend -> Enabled.
No: Compress messages between Charge point and
backend -> Disabled.
NOTE: Before enabling this option consult to your backend
administrator if central system allows this function.
Partial: Consumed value of energy by the vehicle sent
between start and stop.
Total: actual count of the total accumulated energy meter
sent between start and stop.
Partial: Sends partial energy consumption while vehicle is
charging.
Total: sends the actual count of the total accumulated
energy meter.
Yes: Stop existing charge transaction after response from
backend (StartTransaction.conf) when user is blocked,
expired or Invalid.
No: Charge transaction does not stops even if backend
rejects the user. (StartTransaction.conf)
NOTE: Set this option according to your backend system.
Description