H Connector Status - Circontrol Master-Slave Instruction Manual

H
Connector status
The HMI screen shows a different symbols over the connector pictures, as
you can see below:
Connector available, a Charging Session can be
starded.
Connector charging, a Charging Session cannot
be starded because it is already in use.
Connector disabled, a Charging Session cannot
be starded because it is under maintenance or
because the Back office has decided to stop it.
Connector out of service, a Charging Session
cannot be starded due to some error.
Tap on the 'Information' button in order to get
more information about it.
Connector reserved, a Charging Session can
only be starded using the IdTag assigned to the
reservation.
19