Table of Contents
Advertisement
Master/Slave Instruction Manual
Go to Network > LAN > Static Leases
Complete the fields with the following information:
Hostname - It can be written the name wanted for the Charge Point
MAC address - It will be the MAC number found on the label behind the
HMI screen
IP address - 192.168.1.50
After filling the fields, click on the 'Save' button.
Switch off the Charge Point, wait for 10 seconds and switch it on again.
52
Advertisement
Table of Contents
Need help?
Do you have a question about the Master-Slave and is the answer not in the manual?
Questions and answers