Intermec EasyCoder 3400d User Manual page 38

Twinax Interface
7. If there is no printout, suspect the host of transmitting illegal characters that
8. After you have completed the test, refer to your printer user's manual for
If you cannot solve your printing problems, call Intermec for service.
36
Here are some examples of printer commands:
The last characters of the printer command string form the Print command:
3400-t4
Within the printer commands, look for invalid printer commands or
incorrect syntax.
are inhibiting processing of data during the final stage. Go back and
examine the printout from the earlier stage of processing. There you should
be able to find characters that are causing the problem.
information on how to return to normal operation.
3400-t1