Programming For The Twinax Interface - Intermec EasyCoder 3400d User Manual

Twinax Interface
5. When your printer has successfully completed downloading information
If the printer responded as described in the procedure, you have successfully
installed the twinax interface. Proceed to the following section entitled

"Programming for the twinax interface."

If the printer failed to produce the results described in the above procedure,
refer to the "Troubleshooting" section starting on page 26. If you cannot get the
printer to print the sample labels after following the recommendations in
"Troubleshooting," call your Intermec service representative.
Programming for the twinax interface
This section describes how to write RPG print programs for your host computer
that enable the twinax interface to control printer output. An example RPG
print program is provided for you. When you complete this section, you will be
able to do the following:
• Understand how to send control characters to the twinax interface.
• Understand how to send label formats and data to the twinax interface.
• Understand how the twinax interface handles the erroneous messages it
• Write RPG print programs for your Intermec printer with a twinax interface.
16
with Data Line Print, refer to your printer user's manual for information on
returning to normal print mode.
receives from the host.