Intermec EasyCoder 3400d User Manual page 34

Twinax Interface
3. The printer starts printing the contents of the error log, one error per label. It
Note: The error log will not record errors in printer commands. The error log is erased
when it is printed.
Error log label
4. After the printer stops printing error labels, set the twinax interface rear
32
prints errors in the order they are received by the printer, starting with the
newest and ending with the oldest. The error label is shown in the following
figure.
This label is not available
electronically.
panel switches back to the original setting you recorded in Step 1.