Twinax Interface
6. Look at the two lights on the twinax interface rear panel. Both the green light
Twinax interface rear panel lights
Note: The green light is OFF because the twinax interface is not connected to the host.
7. If the twinax interface passed the self-test, return the switches to their
8. Install the twinax interface cable, turn the printer on, and resume normal
30
and the amber light should be off. If either light is on or flashing, the twinax
interface has failed its self-test and must be repaired or replaced. Please call
your Intermec service representative.
Green
Online
Light
Amber
Fault
Light
original setting.
operation.
Twinax
Interface
Panel
ONLINE
FAULT
TWIN-09