To select an international character set, refer to the printer commands section of
your printer user's manual. Look for the command to select printer language
(<SI>l{n}). Your printer user's manual contains details on how to select the
different languages. For example, to set the printer language to Italian, send the
following command: <SI>l{6}.
Understanding character set limitations
There are certain characters that are not available to you. These characters were
either not available in the Intermec purchased fonts or they were not defined in
the multinational character set at the time of product introduction. Your
Intermec printer cannot print the following seven EBCDIC characters:
Character
Hex Code
≤
8D
↑
AD
ƒ
B4
≠
BC
=
BF
≥
DA
∋
FA
You are now ready to try your printer with the twinax interface. Before you
start, take time to learn about the status light meanings.
T
Twinax Interface
13