Table of Contents
Advertisement
Chapter 4 — Developing and Installing Applications
Installing Applications Using SmartSystems Server
Installing Applications Using Microsoft ActiveSync
70
You can use the SmartSystems server to drag-and-drop Intermec
applications onto your mobile computers. The computer ships with the
SmartSystems client, which means it is SmartSystems-enabled. The console
is part of SmartSystems Foundation, which you can download from
www.intermec.com/SmartSystems. For help using the console, see the
online help.
To use SmartSystems console to install an application
1 Download your application file from the Intermec web site and unzip it
on your desktop PC.
2 Double-click the application file to install it. The application file should
appear in the Software Vault.
3 From the SmartSystems console in the Software Vault, drag-and-drop
the application onto each mobile computer in your network.
You can use Microsoft ActiveSync to establish a connection between your
PC and the computer. ActiveSync transfers files, synchronizes files,
performs remote debugging, and other device management activities. For
more information on installing and using ActiveSync, see
ActiveSync" on page
33.
You can have a serial or USB ActiveSync connection to the mobile
computer. When you only have a few computers to update, you can copy
files using Windows Explorer on a PC.
This procedure assumes that Microsoft ActiveSync is installed on your PC
and is up and running.
To install an application on the computer using ActiveSync
1 Connect the mobile computer to a PC using a USB cable. You may have
to disconnect and then connect the cable to "wake" the connection.
2 Wait for a "Connected" message to appear in the Microsoft ActiveSync
application to signal a connection to the mobile computer.
If necessary, select File > Get Connected to initiate a connection.
741 and 751 Mobile Computers (Windows Mobile 5.0) User's Manual
"Using Microsoft
Advertisement
Table of Contents
Troubleshooting
