Launching An Application Automatically - Intermec 741 User Manual

Chapter 4 — Developing and Installing Applications

Launching An Application Automatically

74
7 Tap Yes to continue with the clean boot. The computer performs a
clean boot and restarts with all of the checked components installed.
Understanding the InstallSelect Software Components
Component Name
Data Collection &
Intermec Settings
Funk Wireless Security
Printer Support
SmartSystems Client &
Intermec Settings
Intermec DHCP Client
Bluetooth
Avalanche Enabler
There are two ways to automatically launch your application when you
perform a reset on the computer:
• Make sure your CAB file places a shortcut to your application in the
\Windows\StartUp folder.
• Configure the AutoRun program to launch your application.
The computer contains a program called AutoRun.exe which automates
operations such as launching other processes. You can configure
AutoRun.exe through the AutoRun data file, AutoRun.dat. This script file
must be located in the same directory as the program.
AutoRun supports the following script commands in AutoRun.dat:
AutoRun Script Commands
Command Description
EXEC Launches a specified program and waits for it to finish (up to 10
minutes)
CALL Processes a specified file of commands and returns.
CHAIN Processes a specified file of commands and does not return.
RUN Loads a specified program and executes it.
LOAD Loads a specified program and executes it.
741 and 751 Mobile Computers (Windows Mobile 5.0) User's Manual
Description
Data collection and Intermec Settings. Also includes on-unit
SDK libraries.
If you disable this CAB file, you cannot scan or collect data
on the device and you cannot use Intermec Settings.
Intermec security supplicant that provides a wireless security
solution with several features that are not supported by
Microsoft.
Provides Intermec printer driver support.
Enables the client SmartSystems Server and the use of
Intermec Settings on the local computer.
If you disable this CAB file, you cannot use SmartSystems or
Intermec Settings locally on the device.
Provides the Intermec DHCP client application.
Provides the Intermec Bluetooth application support.
Enables the client to the Wavelink Device Management
solution.