Intermec 741 User Manual page 73

741 and 751 Mobile Computers (Windows Mobile 5.0) User's Manual
2 Enter a Network name. If the network was detected, the network name
is entered and cannot be changed.
3 From the Connects to list, select where you want your network to
connect:
• If you select Work, you can create a VPN connection or use proxy
servers.
• If you select The Internet, you can connect directly to the internet.
4 (Optional) To connect to an ad-hoc connection, select This is a device-
to-device (ad-hoc) connection.
5 Tap Next.
6 Follow these steps to disable authentication:
a Set Authentication to Open if WEP keys are not required or to
Shared when WEP keys are required for association.
b Set Data Encryption to Disabled.
Follow these steps to enable WEP encryption:
a Set Authentication to Open if WEP keys are not required or to
Shared when WEP keys are required for association.
b Set Data Encryption to WEP.
c To change the network key, clear The key is automatically
provided check box, enter the new Network key, and then select the
appropriate Key index.
Follow these steps to enable WPA authentication:
a Set Authentication to WPA.
b Set Data Encryption to either WEP or TKIP.
Follow these steps to enable WPA authentication using a preshared key:
a Set Authentication to WPA-PSK.
b Set Data Encryption to either WEP or TKIP.
c Enter the new Network key.
Follow these steps to enable WPA2 authentication:
a Set Authentication to WPA2.
b Set Data Encryption to AES or TKIP.
c Enter the new Network key.
Follow these steps to enable WPA2 authentication using a preshared
key:
a Set Authentication to WPA2-PSK.
b Set Data Encryption to AES or TKIP.
Chapter 3 — Configuring the Computer
63