Bdcom S5864 Hardware Installation Manual page 24

1~4 QSFP+ port indicator
40GE The 40GE port breaks out into
BREAKOUT(1~4) 4 10GE ports
1. work in the mode of 40GE
If the indicator is always on, the system is
normally linked.
If the indicator is off, the port is not linked.
If
2 ． The 40GE port breaks out into 4 10GE
ports
The 4 port indicators are on in turn. The
interval between two indicators is 5 seconds.
The indicators combing with BREAKOUT
indicators show the state of 10GE ports.
1.
BREAKOUT indicator is off.
2.
10GE ports and combines with QSFP+ port
indicator
3.
status of the 4 40GE BREAKOUT indicators
Figure 5- 1 SFP+ port indicator
- 20
S5864 Hardware Installation Manual
the indicator
there is data transmission.
In the mode
40GE mode, the
The 40GE port breaks out into 4
The QSFP+ port
shows the
flickers,
of
indicator