7.3 Changing the lining
The lining is attached to the orthosis with micro-hook. It has to fit inside the orthosis without
wrinkles and must be in contact with the orthosis over the entire surface area.
Removing the lining
1) Detach the folded lining in the neck area.
2) Starting at the closure, detach the lining all around the orthosis.
Inserting the lining
5
6
1) Roll up the lining into a tight roll (see
fig. 5).
2) Position the lining at the closure of the
orthosis. Carefully unroll the lining, press
ing it into the orthosis without wrinkles (see
fig. 6).
3) Ensure that the lining projects slightly bey
ond the hard edge all around.
17