Legal Information; Avant-Propos - Otto Bock 17PK1 WR Series Instructions For Use Manual

INFORMATION
The lock is chosen according to the joint and may not be used for installa­
tion on other joints.
► Observe the information in the service set when replacing parts.
The manufacturer requires at least a semi-annual inspection of the product
to verify functionality and check for wear.
Spare parts are listed in the section "Components/design".
Replacing the bushing
1) Loosen the joint screw and remove the joint bolt and joint nut from the
upper joint section.
2) Disassemble the orthotic joint.
3) Insert the new bushing into the lower joint section.
4) Assemble the orthotic joint with the joint bolt, joint nut and joint screw.
5) Clean the threads of the screw connections using a degreasing cleaner
and secure them with Loctite 241.
8 Disposal
Dispose of the product in accordance with national regulations.

9 Legal information

All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthor­
ised modification of the product.
9.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 on medic­
al devices. The CE declaration of conformity can be downloaded from the
manufacturer's website.

1 Avant-propos

INFORMATION
Date de la dernière mise à jour : 2021-08-17
Français
17