Intended Use - Otto Bock 17PK1 WR Series Instructions For Use Manual

2.2 Components/design
Item
1 Countersunk screw
2 Lock cover
3 Perlon cable
4 Compression spring
5 Threaded sleeve
6 Lock
7 Upper joint section
8 Receiver for set screw
9 M4x12 set screw
10 Bearing bushing
11 Joint bolt
12 Countersunk screw (17PK1=14-WR)
Cap screw (17PK1=20-WR)
13 Joint nut with M6 interior thread
14 Lower joint section
15 Insertion zone for bar
16 Countersunk screw (17PK1=14-WR)
Cap screw (17PK1=20-WR)
17 Parallel truing tube adapter
(17PK1=14-WR only)
18 Parallel truing tube
Not included in the scope of delivery (see fig. 1)
Item Quantity
[Piece
(s)]
19 1

3 Intended use

3.1 Indications for use
The waterproof orthotic joints made of plastic are to be used exclusively in
pairs for lower limb orthotic fittings in waterproof walking devices.
The waterproof walking aid is intended for use in wet areas, e.g. transfer
into a pool, and is not a replacement for the initial orthosis.
3.2 Indications
• Partial or total paralysis of the leg muscles
12
Component
Designation
Side bar
Reference number
17PK1=14-WR
29PK1=14
21A12
506G21=M4x12
29PK2=14
29PK4=14
Reference number
651P4*, 605P8*
17PK1=20-WR
29PK1
21A12
506G21=M4x12
29PK2
29PK4