Advertisement
FUNNEL SECTION
BC -8
BC -7
BC -6
BC -5
BC -4
BC -3
BC -2
BC -1
STEP 1: Attach rail K (55cm) to the single side of a Rail Splitter and extend through arm BG-3 leaving the Rail
Splitter approximately 3 cm to the left of arm BG3. Proceed to arm C-6 then loop up to arm C-7 and trim any
excess rail. This will catch the marble from the rail added in step 2 on page 24.
STEP 2: Starting at the Rail Clip on the front of the Rail Splitter attach rail V (475 cm) and create the funnel
stunt by attaching through arm BC-8, BD-8, BC-7, BD-7, BC-6, BD-6, BC-4, BD-4, BC-3, BD-3, BC-2, BD-2, BC-1,
and BD-1. Funnel should be approximately 18.5 cm at the top and 10 cm at the bottom. After exiting the
Funnel continue to arms AV-3, Q-2, and AQ-2.
Image showing G–Step 1
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
Q -2
AV -3
AQ -2
BD -1
BD -2
BD -3
BD -4
BD -5
BD -6
BD -7
BD -8
Image showing G–Step 2
BG -3
C -7
C -6
Page 27
Advertisement
