Spacerails Level 9 Instruction Booklet page 23

MIDDLE SECTION STAIR STEP AND FUNNEL EXIT
AU -2
AT -2
STEP 1: Attach rail I (46 cm) Through arm AP-1, AE-2, and K-2. Allow rail to extend at least 6 cm beyond the
arms on both ends. Attach Rail Clips as needed. Add See-Saw Arm to A-3 and AP-2 facing as shown above.
STEP 2: Starting at the second Elevator Ring on the left side of elevator A attach rail Q (93 cm) and pass it
through arms AT-2, AU-2, AQ-1, and then loop up and through AQ-3.
Image showing B–Step 2
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
Q -1
AQ -3
Image showing B–Step 3, 4, and 5
AP -1 AE -2
AQ -1
K -2
Image showing C–Step 2
Page 23