Otto Bock AxonRotation 9S503 Instructions For Use Manual page 11

damage caused by disregarding the information in this document, particularly due to improper
use or unauthorised modification of the product.
8.2 Trademarks
All product names mentioned in this document are subject without restriction to the respective
applicable trademark laws and are the property of the respective owners.
All brands, trade names or company names may be registered trademarks and are the property of
the respective owners.
Should trademarks used in this document fail to be explicitly identified as such, this does not justi­
fy the conclusion that the denotation in question is free of third-party rights.
8.3 CE conformity
Otto Bock Healthcare Products GmbH hereby declares that the product is in compliance with
applicable European ergänzen!European requirements for medical devices.
The product meets the requirements of the RoHS Directive 2011/65/EU on the restriction of the
use of certain hazardous substances in electrical and electronic devices.
The full text of the regulations and requirements is available at the following Internet address:
http://www.ottobock.com/conformity
9 Technical data
Ambient conditions
Storage (with and without packaging)
Transport (with and without packaging)
Operation
General
Reference number
Product service life
Active pronation from the neutral position
Active supination from the neutral position
Maximum torque
Idle speed
Rotation angle
Weight
Load limits
Maximum static vertical load
Maximum dynamic vertical load
10 Appendix
10.1 Symbols Used
Declaration of conformity according to the applicable European directives
+5 °C/+41 °F to +40 °C/+104 °F
Max. 85%relative humidity, non-condensing
-20 °C/-4 °F to +60 °C/+140 °F
Max. 90% relative humidity, non-condensing
-5 °C/+23 °F to +45 °C/+113 °F
Max. 95% relative humidity, non-condensing
9S503
5 years
160°
160°
1.5 Nm
25 RPM
150°/sec.
approx. 140 g/4.94 oz
700 N
200 N
11