General Safety Instructions; Safety Instructions For Assembly; Further Information; Nameplate - Otto Bock Dino 3 Instructions For Use Manual

Safety

3.2 General safety instructions

CAUTION
Use of unsuitable tools
Pinching, crushing or damaging the product due to use of unsuitable tools
► When completing the tasks, only use tools that are suitable for the conditions at the place of work and for
which safety and the protection of health are assured with proper use.
► Observe the specifications in the section "Required Tools".
NOTICE
Tipping or falling of the product
Damage to product due to lack of attachment
► When you work on the product, secure it so that it cannot tip over or fall over.
► Use a clamping fixture to secure the product whenever you work on it at a workbench.
INFORMATION
While installing add-on drives on the product is generally not permitted, it can be reviewed by our Custom Fabric­
ation department on request.

3.3 Safety Instructions for Assembly

CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► When folding the mobility base for seating shells out or together, only grip by the specified components.
CAUTION
Sudden extension of gas compression springs
Impacts, pinching, crushing due to incorrect handling
► The gas compression springs must be fully extended when carrying out any work (seat tilt released, seat in the
neutral horizontal position).
► Never operate the release lever for the seat tilt when screw connections are loosened or when working on the
product.
► Secure the release lever for the seat tilt during all work to avoid operating it unintentionally.

3.4 Further information

INFORMATION
The serial number required for enquiries and orders can be found on the nameplate. For explanations of the
nameplate, see the section "Nameplate" (see Page 6).

3.5 Nameplate

The nameplates are found under the seat on the front cross tube of the main frame.
Label
6
A Manufacturer's product name
B CE marking
C Maximum load (see section "Technical data")
D Manufacturer information/address
E Serial number 1)
2)
F Manufacturing date
G Symbol for medical device
H WARNING! Read the instructions for use before using the
product. Observe
(e.g. warnings, precautions).
I Manufacturer's reference number for the product variant
Meaning
important safety-related information
Dino 3