Otto Bock Dino 3 Instructions For Use Manual page 27

The design, manufacturing and requirements for the intended use of the product are based on the expected life­
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.
12 Technical data
INFORMATION
► Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe­
cified – cannot be adjusted in the mm range but only in increments of approx. 0.5 cm or 1 cm.
► Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be ±10 mm and ±2°.
INFORMATION
► Some of the measurements indicated below are values that were theoretically determined.
► Note that not all adjustment possibilities can be used with all product versions. Furthermore, the adjustment
combinations are limited by the compact frame geometry.
► Technical changes and tolerances are reserved by the manufacturer.
General information
Dimensions, weights
Total weight [kg (lbs)]
Weight of the heaviest removable component:
• 24" drive wheel [kg (lbs)]
Overall length (with leg support) [mm (")]
Overall width [mm (")]
Overall height (with quick-release axles) [mm (")]
Static stability, uphill [° (%)]
Static stability, downhill [° (%)]
Static stability, sideways [° (%)]
Seat bottom angle (seat tilt) [°]
3)
Seat depth [mm (")]
3)
Seat width [mm (")]
Front seat height [mm (")]
Back support angle [°]
Back support height [mm (")]
Distance foot plate to seat bottom [mm (")]
Angle leg support to seat bottom [°]
Handrim diameter [mm (")]
Horizontal axle position [mm (")]
Minimum turning radius [mm (")]
Adjustment range, push handles/push bars [mm (")]
Wheels
Caster wheel
Rear wheel (transport chair)
Drive wheel (self-propelled)
1)
With maximum installation of accessories
2)
Depending on seat positioning and anti-tipper setting
3)
In reference to seating shell mobility base without seating unit
4)
Depending on leg support and seating unit
5)
For 22"/24" drive wheels
Dino 3
2)
2)
2)
3)
3)
4)
4)
5)
Minimum
14.5 (32)
---
830 (32.7)
540 (21.3)
965 (38)
---
---
---
-5
345 (13.5)
360 (14.2)
435 (17.1)
80
---
200 (7.9)
5
490 (19.3)
150 (5.9)
750 (29.5)
---
Size ["]
5.5
6
7
12.5
22
24
Technical data
Maximum
1)
27.5 (60.6)
1.8 (4)
1,180 (46.5)
695 (27.4)
1,400 (55.1)
10 (17)
10 (17)
10 (17)
+30
495 (19.5)
440 (17.3)
485 (19.1)
120
550 (21.6)
580 (22.8)
90
540 (21.3)
300 (11.8)
---
~ 160 (6.3)
Tyres
Elastic PU
PU
Pneumatic
PU/pneumatic
27