5) Check the tipping behaviour.
INFORMATION: If the complete product tips forward, static stability can be achieved by readjusting
the following options:
• Seating centre of gravity (see Page 13)
• Wheelbase (for 22"/24" drive wheels, see Page 19)
→ Check the tipping behaviour again after adjusting the settings.
27
8.2 Final inspection
A final check must be carried out before the wheelchair can be handed over:
•
Are all options installed according to the order form?
•
Do the wheels turn easily?
•
Is the seating shell/seating solution correctly adapted to the user?
•
Is the seating centre of gravity adjusted correctly?
•
Are the leg supports/side panels (option) adjusted correctly?
•
Does the back angle adjustment engage securely in the proper position?
•
Can the seat tilt be operated smoothly and securely locked?
For 22"/24" drive wheels: Can the quick-release axles be easily removed when pulled on firmly and inserted?
•
For pneumatic tyres: Is the tyre pressure correct (see Page 27)?
•
•
Only after adjustment: Have the brakes (wheel locks) been adjusted correctly?
If present: Is the anti-tipper mounted and adjusted correctly?
•
•
Are all screws firmly tightened and all hook-and-loop fasteners firmly fastened?
8.3 Transport to the customer
NOTICE
Use of unsuitable packaging
Damage to the product caused by transportation using incorrect packaging
► Use only the original packaging for delivery of the product.
The mobility base for seating shells should be transported to the user in a completely assembled state using the
outer packaging.
The wheels should be removed if necessary for delivery with 22"/24" drive wheels.
8.4 Handing over the product
WARNING
Lack of instruction
Tipping over, falling of the user due to lack of knowledge
► Instruct the user or the attendant in the proper use of the product when handing it over.
The following steps must be performed for the safe handover of the product:
Dino 3
120°
30°
10°
28
Delivery
25