I All Ships Call; I Group Call; I Geographical Area Call - Icom IC-M802 Instruction Manual

8
WHEN RECEIVING A CALL

I All ships call

q When receiving an All ships call, an emergency
alarm may sound (or beeps when the category is
Safety) and "
• Push [CANCEL/CALL] to stop the alarm when the all
ships call in distress or urgency is received.

I Group call

q When receiving an Group call, beeps may sound
and " " is displayed as below.
• Push [CANCEL/CALL] to stop the alarm when an emer-
gency or urgency group call is received.
Calling station's name appear when
the same ID is preprogrammed.

I Geographical area call

NOTE: The IC-M802 will not function for the geo-
graphical call when:
• Your position is out of the specified area.
• GPS data is not connected to [GPS] and you
haven't input the position information manually.
q When receiving a geographical area call and your
position is in the specified area, "
is displayed as below.
• Push [CANCEL/CALL] to stop the emergency alarm
when the call is sent in distress.
40
" is displayed as below.
"
w Push [ENT] to listen to the traffic frequency for an
announcement from the calling station.
e Communicate with the ship when the calling ship
requires such.
r Push [FREQ/CH] when the call does not require
any action on your part.
w Push [ENT] to listen to the traffic frequency for an
announcement from the calling ship (mother ship
in your group).
e Communicate via the microphone with the ship
when the calling ship requires such.
r Push [FREQ/CH] to return to DSC watch mode.
w Push [ENT] to select the traffic frequency, and lis-
ten for an announcement from the calling station.
• Rotate [CH] to scroll text to see the hidden lines infor-
mation.
e Push [FREQ/CH] to return to DSC watch mode.