I Verifying Self-Id; I Memory Reading/Deleting - Icom IC-M802 Instruction Manual

10
DSC MENU OPERATION

I Verifying self-ID

➥ During setup select menu indication, rotate [CH] to
select "
play the programmed MMSI ID (self-ID).
➥ Push [DSC] to select DSC watch mode.
➥ Push [MODE
SET
➥ Rotate [CH] to select "
• Push [MODE
SET
push [FREQ/CH] to return to the select screen.

I Memory reading/deleting

q During setup select menu indication, rotate [CH] to
select the desired memory item then push [ENT].
• Push [DSC] to select DSC watch mode.
• Push [MODE
SET
• Rotate [CH] to select "
w Rotate [CH] to select the desired memory, then
push [ENT].
46
" then push [ENT] to dis-
] to select DSC menu.
" then push [ENT].
] to return to DSC watch mode, or
] to select DSC menu.
" then push [ENT].
e Operate as follows:
➥ When reading the memory contents only;
• Push [ENT] to return to the appropriate mem-
ory list screen.
➥ When deleting the memory contents;
• Push and hold [CE] for 1 sec.
- After deleting, the appropriate memory list screen
is displayed automatically.