D Transmitting An All Ships Call - Icom IC-M92D Instruction Manual

8
DSC OPERATION
D Transmitting an All Ships call
All ships, that have DSC transceiver, use Channel 70 as their
'listening channel.' When you want to announce a message
to these ships within range, use the 'All Ships Call' function.
Enter "ALL SHIPS CALL" in the DSC CALLS menu.
q
➪
MENU
(Push [MENU])
Select a desired category, using [
w
[ENT].
• The selectable categories may differ, depending on the pro-
grammed setting. Ask your dealer for the selectable catego-
ries.
Select a desired traffic channel, using [
e
[ENT].
• The selected channel is displayed.
33
DSC Calls ➪ All Ships Call
(Push [Y]/[Z], then push [ENT].)
Y]/[Z], then push
Y]/[Z], then push
A confirmation screen appears.
r
• Confirm the call contents.
Push [CALL] to transmit the All Ships call.
t
• If Channel 70 is busy, the transceiver stands by until the chan-
nel becomes clear.
After the All Ships call has been transmitted, the following
y
screen is displayed.
Announce the message using the microphone.
u
After the announcement, push [EXIT] to return to the nor-
i
mal operating mode.