Icom IC-M802 Instruction Manual page 33

D D Urgency call operation
q Push [MODE
] to select the DSC menu.
SET
w Rotate [CH] to select either "
" " then push [ENT].
• When selecting "
e Rotate [CH] to select "
[ENT].
Ç
r Rotate [CH] to select a traffic frequency from one
of the pre-programmed frequencies or "
" then push [ENT].
✔ When a pre-programmed frequency is selected,
go to step y.
Ç
t Enter the desired traffic frequencies for both the
transmit and receive, then push [ENT].
y Rotate [CH] to select the desired calling channel,
then push [ENT].
Ç
" or
"
," then push
u After the calling stand-by screen appears, push
and hold [CANCEL/CALL] for 1 sec. to transmit the
urgency call.
• The transceiver is set to the traffic frequency after the
call transmission.
• Push and hold [ENT] for 1 sec. to store the calling con-
dition into the TX memory described in pages 23 and
43, if desired.
i Announce the following message.
• "PAN PAN"
• "All stations" (repeated 3 times).
• "This is ..... (your ship name)."
• The 9-digit identity AND the call sign (or
other identification of the ship)
• The text of the urgency message.
CALL PROCEDURE
7
7
25