I Position Request Call - Icom IC-M802 Instruction Manual

8
WHEN RECEIVING A CALL

I Position request call

q When "
push [ENT].
Calling station's name appears when
the same ID is preprogrammed.
w Push [ENT] to display the call contents for ac-
knowledgement preparation.
42
" is displayed as below,
e Verify your position and time, then push [ENT].
• When the position or time requires a change, use the
keypad and [CH] for settings.
• [CH] moves the cursor.
r Push and hold [CANCEL/CALL] 1 sec. to transmit
the Position request acknowledgement.
• Returns to DSC watch mode after the transmission, au-
tomatically