Icom IC-M802 Instruction Manual page 31

!3 When receiving the acknowledgement call, the dis-
play shows the received ID code, or the called sta-
tion name.
• Push [FREQ/CH];
- to select the traffic frequency if the called station is
able to comply to the call.
- to return to DSC watch mode when unable.
When the called station is unable to comply
to the call, the reason may be displayed.
✔ CONVENIENT!
The IC-M802 has DSC TX memory. You can store
often used DSC calling conditions for quick and sim-
ple re-call. Up to 10 conditions can be stored into the
memory with the following instructions.
¡ When call stand-by screen is displayed as in step
!1 at left, push and hold [ENT] for 1 sec.
™ Rotate [CH] to select the desired TX memory chan-
nel number.
Ç
£ Push and hold [ENT] for 1 sec. again to store the
condition into the selected memory channel.
Ç
¢ Push [ENT] to return to the calling stand-by condi-
tion.
∞ Push and hold [CANCEL/CALL] for 1 sec. when
transmitting the DSC call in set condition, or push
[MODE ] when returning to DSC watch mode.
SET
CALL PROCEDURE
7
7
23