I Skip Channel Setting; I Scan Resume Condition - Icom IC-T81A Instruction Manual

8
SCAN FUNCTIONS

I Skip channel setting

Memory channels can be set to be skipped during memory
scan. This is useful to speedup the memory scan interval.
➀
Push [MR] to select memory mode.
➁
Push [ MW] for 1 sec. to enter memory write mode.
(MR)
➂
Rotate [DIAL] (or push [MULTI(↔)]) to select a memory
channel.
➃
Push [MULTI(↕)] twice times to select "SKIP."
➄
Push [MULTI(↔)] (or rotate [DIAL])
to toggle the skip setting for the se-
lected channel ON/OFF.
• "SKIP" appears when the channel is
set as a skip channel.
➅
Push [VFO] to program the setting
and exit memory write mode.
NOTE: Scan edge channels, 0A to 9B, cannot be set to
show "SKIP" settings, however, they will be skipped dur-
ing scan.
24
I Scan resume
condition
The resume condition can be selected as a pause or timer
scan. This setting is common for all scans.
Receiving
a signal
Pause
scan
MR
Timer
scan
10 sec. 2 sec.
SKIP
MR
➀
Push [MULTI] for 1 sec. to enter set
mode.
➁
Push [MULTI(↕)] one or more times
until "SC" appears.
➂
Push [MULTI(↔)] (or rotate [DIAL])
to select the desired scan resume
condition.
• "T-10": scan pauses for 10 sec. on a
received signal.
• "P-02": scan pauses on a received signal until it disappears.
➃
Push [VFO] to exit set mode.
SET MODE
USING
When receiving a signal, pause
scan pauses until the signal dis-
appears; timer scan pauses for
10 sec.