I Full/Programmed Scan; I Memory (Skip) Scan - Icom IC-T81A Instruction Manual

I Full/programmed scan

➀
Push [VFO] to select VFO mode, if necessary.
➁
Push [MULTI(↔)] for 1 sec. to start the scan; after that,
each push of [MULTI(↔)] selects a different scan range.
• To change the scan direction, rotate [DIAL].
➥
The following scan ranges are selectable:
• "ALL 50" for full scan on the 50 MHz band.
• "ALL 144" for full scan on the 144 MHz band.
• "ALL 430" or "ALL 440" for full scan on the 430(440) MHz
band.
• "ALL WFM" for full scan on the WFM (FM broadcast) band.
• "ALL 118" for full scan on the air band.
• "ALL 1200" for full scan on the 1.2 GHz band.
• "PROG 0" to "PROG 9" for one of the programmed scans.
➂
To stop the scan, push [VFO].
NOTE: For programmed scan, scan edges must be pro-
grammed in advance (0A/0B are programmed by default).
Program scan edges in the same manner as regular mem-
ory channels (p. 18).
If the same frequencies are programmed into a pair of scan
edges, programmed scan does not proceed.

I Memory (skip) scan

➀
Push [MR] to select memory mode, if necessary.
➁
Push [MULTI(↔)] for 1 sec. to start the scan; after that,
each push of [MULTI(↔)] selects a different scan group.
• To change the scan direction, rotate [DIAL].
➥
The following memory groups are selectable:
• "SEL ALL" scans all programmed memory channels.
• "SEL 50" scans programmed memories in the 50 MHz band.
• "SEL 144" scans programmed memories in the 144 MHz
band.
• "SEL 430" or "SEL 440" scans programmed memories in the
430(440) MHz band.
• "SEL WFM" scans all programmed WFM channels.
• "SEL 118" scans all programmed air band channels.
• "SEL 1200" scans programmed memories in the 1.2 GHz
band.
➂
To stop the scan, push [VFO].
NOTE: For memory skip scan, program memory channels
you don't want to search, as "skip" channels (p. 24). Scan
proceeds as above except that any channels specified as
skip channels are not searched.
8
SCAN FUNCTIONS
23