I Memory Names - Icom IC-T81A Instruction Manual

6
MEMORY/CALL PROGRAMMING

I Memory names

Memory channels can be programmed with names of up to
six characters.
➀
Push [VFO] to select VFO mode (or select a memory chan-
nel).
➁
Push [ MW] for 1 sec.
(MR)
• "X" and the previously selected
memory channel number flash.
➂
Push [MULTI(↔)] (or rotate [DIAL])
to select the desired memory chan-
nel.
➃
Push [MULTI(↕)] so that "NAME"
appears.
• Not valid for call channels.
➄
Push [MULTI] to enter name editing
mode.
• The first character of the name flashes.
➅
Rotate [DIAL] (or push [MULTI(↕)]
to select a character; then, push
[MULTI(↔)] to advance to the next
character.
➆
Repeat step ➅ until the desired
name appears.
➇
Push [MULTI] to program the name
and return to the "NAME" display;
then push [VFO] to return to VFO
20
W FM
MR
W FM
MR
W FM
MR
W FM
MR
mode.
• Push [ MW] for 1 sec. to erase a channel's name and return
(MR)
to VFO mode.
• When in memory mode push [MR] to toggle between memory
name indication and frequency indication.
NOTE: To clear a memory name (or remove one or more
characters from a name) without clearing the rest of the
memory channel contents, follow steps ➀ to ➇ at left and
insert an underscore "_" in place of other characters in
steps ➅ and ➆.