I Memory Editing - Icom IC-T81A Instruction Manual

I Memory editing

Memory (call) channel contents can be moved to VFO or to
another memory.
D Transferring a memory (call) channel's
contents
➀
Select the memory (call) channel to
be transferred:
➥ Push [MR] ([CALL)]) to select
memory (call) mode.
➥ Push [MULTI(↔)] to select the
memory (call) channel.
➁
Push [ MW] for 1 sec.
(MR)
• "VF" appears and flashes with "X"
and the previously selected VFO fre-
quency appears..
To transfer the contents to VFO:
➂
Push [ MW] for 1 sec.
(MR)
• The contents are transferred and VFO mode is selected.
To transfer the contents to another memory (call) channel:
➂
Push [MULTI(↔)] (or rotate [DIAL]) to select the memory
(call) channel to be transferred to.
➃
Push [ MW] for 1 sec.
(MR)
• The contents are transferred and memory (call) mode is selected.
D Clearing a memory
Memories can be cleared from VFO or memory mode.
➀
Push [
memory menu mode.
• "X" and a memory channel number
flash.
➁
Push [MULTI(↔)] (or rotate [DIAL])
to select the memory channel to be
DUP
MR
cleared.
➂
Push [MULTI(↕)] to display "CLR."
• Scan edge channels 0A/0B and call
channels cannot be cleared.
MR
➃
Push [
the previously selected memory
channel.
DUP
• "X" and a memory channel number
flash and the previously stored infor-
mation is erased.
➄
Push [VFO] to select VFO mode.
NOTE: Be careful—the contents of cleared memories can-
not be recalled.
MEMORY/CALL PROGRAMMING
MW] for 1 sec. to enter
(MR)
MW] for 1 sec. to clear
(MR)
6
DUP
MR
MR
19